Analytica GmbH AnaGate CAN duo Manual de usuario descargar pdf (Pagina 13)

Chapter 2. Configuration

2.1. Initial installation

First the AnaGate CAN Gateway must be supplied via the power plug with a tension

from 9 to 24 V.

Insert the included LAN cable into the plug labelled LAN and connect it either to a

hub or switch. If connecting directly to a PC use a crossover LAN cable (not in scope

of delivery) instead of the included LAN cable.

2.1.1. Factory settings

The AnaGate CAN Gateway is delivered with the following initial network settings:

IP address 192.168.1.254

Address type static

Network mask 255.255.255.0

The device can now be configured using a standard browser (Internet Explorer,

Firefox, etc.) by using http://192.168.1.254 .

Figure 2.1. HTTP interface, AnaGate CAN X2

Note

The PC used for the configuration must be in the 192.168.1.x network.

The static IP address 192.168.1.2 with the subnet mask 255.255.255.0

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Sin comentarios

Analytica GmbH AnaGate CAN duo Manual de usuario Pagina 13