Analytica GmbH AnaGate CAN duo Manual de usuario descargar pdf (Pagina 12)

1.5.4 AnaGate CAN uno / AnaGate CAN duo –rear view

Chart 1-4: AnaGate CAN Gateway: rear view

The rear of the AnaGate CAN Gateway features the following connectors and LEDs (from left

to right):

1. Power LED (green)

This LED lights up when voltage is being supplied.

2. Power supply

The AnaGate CAN Gateway can be power supplied in two different ways.

For the use as desktop device the barrel connector socket is intended, in order to

supply the equipment via a plug power supply.

For the use in a switchboard the two-pole Wago clamping socket can be used to

connect an external power supply.

Be sure to use only one power supply.

3. LAN port

Via the RJ45 socket the AnaGate CAN Gateway is connected with the Ethernet. The

equipment can be connected to a network component like a hub or a switch. For a

direct connection to a PC a crossover network cable has to be used.

Note: The cable provided is a normal patch cable for the connection to network

components, direct connection to a PC is normally not possible with this cable.

4. USB

The AnaGate CAN Gateway has two USB 1.1 interfaces for further extensions or

customer specific solutions.

5. Digital IO

The AnaGate CAN Gateway has 4 digital inputs and 4 digital outputs which can be

used freely. The digital io are galvanically decoupled from the device and must be

externally power supplied from 3,3V to 24V.

Please refer to “2.6 The digital inputs and outputs” for further details.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Sin comentarios

Analytica GmbH AnaGate CAN duo Manual de usuario Pagina 12