Analytica GmbH AnaGate CAN duo Manual de usuario descargar pdf (Pagina 22)

This line can be connected optionally to GND of the other bus devices.

In gateway mode the CAN messages are transferred transparently over TCP/IP between the

CAN network and the host platform (e.g. PC) in both directions. The AnaGate CAN Gateway

uses a unique CAN ID when sending telegrams, this ID has to be set explicitly.

All CAN messages received by the AnaGate CAN Gateway are transmitted via the API to the

host system, if the device is not requested to discard them generally. Alternatively it is

possible to set individual software filters to reduce the message transfer to the host system.

The software program CAN Monitor, which is included on the documentation CD, can be

used to monitor a CAN bus or to create single CAN telegrams.

3.2 AnaGate CAN Gateway in bridge mode

In the bridge mode two arbitrary CAN networks can be interconnected by two AnaGate CAN

Gateways. The CAN messages are exchanged transparently over TCP/IP between the two

AnaGate CAN. It is possible to mix the different AnaGate CAN Gateway models in bridge

mode.

Chart 3-2: AnaGate CAN Gateway in bridge mode

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

Analytica GmbH AnaGate CAN duo Manual de usuario Pagina 22