Analytica GmbH AnaGate CAN duo Manual de usuario descargar pdf (Pagina 17)

Chart 2-3: Browser interface: CAN settings (AnaGate CAN duo)

NOTE: The AnaGate CAN uno has only one CAN interface, the settings for port B are not

available. The AnaGate CAN quattro has to additional ports named C and D.

2.4 Firmware update

Use the “Firmware” page to load a new firmware to the AnaGate CAN Gateway. Please visit

our Web site http://www.anagate.de for further information.

2.5 Factory reset

In order to restore the default factory settings (IP address/subnet mask:

192.168.1.254/255.255.255.0), hold the RESET for approx. 10 seconds.

If the device is reset successfully, the yellow LED blinks until the RESET is released. The

default factory settings are activated immediately without a restart of the device,

NOTE: If the RESET push-button is pressed too briefly, the current IP address and network

mask is pulsed via the yellow LED (Morse code). A second push of the RESET, terminates

the pulsing, the device is not reset.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

Sin comentarios

Analytica GmbH AnaGate CAN duo Manual de usuario Pagina 17